Turn the user UPS user off and unplug it user from the AC power source.
To clear the overload, unplug some of your equipment from the battery-supplied outlets until manual the icon turns off and the alarm stops.
If grounded, remove the source of ground.p p The equipment connected to the Back-UPS does not accept the step-approximated sine waveform from the unit.HID-compliant USB port enables unattended shutdown without manual data loss during extended power failures, includes manual USB cable.LCD panel Toggle/Selected Switch The switch can be used to select the LCD panel contents including Input user Voltage, Output Voltage and Estimated Run Time.Follow all local ordinances regarding proper disposal of batteries.Note: The output voltage meter shows the status of the battery backup outlets.Ensure that the equipment plugged into the four battery power-supplied outlets does not exceed the UPS unit's rated capacity.The warranty shall be null and voidif any manual unauthorized repair or modifications are carried out on theBack-UPS The following are not covered under the warranty:1.When applicable, the decision torecondition or replace a battery with a new or reconditioned bat-tery lies solely with APC.p p The Back-UPS is overloaded.Thank you for your help!The LED will flash once, twice, or three times per second, indicating the current setting. Turn off and unplug all connected games equipment.
Before contacting APC, please be sure to record the date purchased, UPS model, and serial number (on bottom of unit).
The manual unit will charge in both the ON as well as the OFF position.
Outdoor-UPs-8013/8014, yamaha 115V or 230V input, 48V.DO NOT use in any circumstance that would affect operation or safety of any life support equipment or with any medical applications or patient care.Unplug service devices one at a time to remove overload, if not corrected Contact APC Technical manual Support /p p cracked On Constant Tone On Line Overload - The power drawn by the connected equipment exceeds the power capacity of the Battery Backup /p p Flashing Chirp every.Attractive gray tower configuration, includes 3 battery supported outlets, plus 3 additional surge suppression-only outlets, 6 foot AC line cord (all nema 5-15).Some components can be energized by the battery even when the AC input power is disconnected.HID-compliant USB interface enables integration with built-in power management and auto-shutdown features of Windows and Mac.The outlet should be near the equipment andeasily accessible.p p The output waveform is designed for computers and computer-related equipment.LCD Module Display High resoluation and intelligent LCD panel shows all the UPS information with icons and messages.There are many factors that can affect the amount of power that your invalid computer system will require. Make sure the wall branch outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g.PowerAlert software available via free download from.
Thecustomer is responsible for paying shipping charges both toand from the APC service center.
Released electrolyte is harmful to skin and eyes and may be toxic.
Supports Tripp Lite's WatchDog software dcp 600 ups user manual application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again.